Weider Pro 9935 Bedienungsanleitung PDF herunterladen (Seite 21)

Miscellaneous Assembly

52. Insert a 1/4Ó x 2 1/2Ó Carriage Bolt (45) through the

center hole in a Seat Plate (65). Attach the Seat Plate

to a Seat (13) with two 1/4Ó x 3/4Ó Bolts (49).

Insert the 1/4Ó x 2 1/2Ó Carriage Bolt (45) into the indi-

cated hole in the Butterfly Seat Frame (14) and

secure it with a 1/4Ó Flat Washer (71) and a 1/4Ó

Nylon Locknut (68). Secure the other end of the Seat

(13) with a 1/4Ó x 2 1/2Ó Bolt (79) and a 1/4Ó Flat

Washer (71).

Attach the other Seat (13) to the Press Seat Frame

(7, not shown) in the same manner.

53. Press a 3/4Ó Round Inner Cap (43) into each end of

the two Pad Tubes (42).

Insert one Pad Tube (42) into the indicated hole in the

Front Leg (20). Slide a Foam Pad (30) onto each end

of the Pad Tube.

Insert the other Pad Tube (42) into the indicated hole

in the Small Leg Lever (41). Slide a Foam Pad (30)

onto each end of the Pad Tube.

54. Press a 1 3/4Ó Square Inner Cap (35) into the indicat-

ed end of the Adjustment Tube (90).

Attach the Adjustment Tube (90) to the bracket (not

visible in the drawing) on the back of the Leg Press

Plate (55) with a 5/16Ó x 2 1/2Ó Bolt (87), two 5/16Ó

Washers (36), and a 5/16Ó Nylon Locknut (64).

Attach the Leg Press Plate (55) to the Leg Press

Lever (83) by placing the Adjustment Tube (90) into

the bracket on top of the Leg Press Lever and secur-

ing it with the Lock Pin (91). Note: The lip on the

Leg Press Plate must be on the upper edge.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 32 33

Keine Kommentare

Weider Pro 9935 Bedienungsanleitung Seite 21