Weider WEBE2496 Bedienungsanleitung PDF herunterladen (Seite 10)

his section explains how to adjust the weight bench. See the accompanying exercise guide to see the correct

form for each exercise. Make sure all parts are properly tightened each time the weight bench is used. Replace

ny worn parts immediately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive deter-

gent. Do not use solvents.

ADJUSTING THE BACKREST AND THE SEAT

To adjust the position of the Backrest (16), pull out

on the Backrest Knob (28). Then, adjust the angle

of the Backrest and reinsert the Backrest Knob.

To adjust the angle of the Seat (17), pull the Seat

Pin (29) out of the Seat Frame (5) and move the

Seat up or down. Then, reinsert the Seat Pin

through the Seat Frame.

ADJUSTMENTS

ADJUSTING THE POSITION OF THE TRAYS

To adjust the height of the Trays (18), first remove

the Adjustable-Weight Dumbbells (19). Next,

loosen the Post Knobs (30) and raise or lower the

Left and Right Uprights (8, 9) to the desired height.

Then, retighten the Post Knobs.

Make sure that

the Post Knobs are inserted into adjustment

holes in the Uprights; in addition, make sure

that the Uprights are at the same height.

o adjust the angles of the T

rays (18), first remove

the

Adjustable-W

eight Dumbbells (19). Next, lift

the Tray Supports (10) and turn them to the

desired angles. Then, set the pins on the

ray

Supports into the desired notches in the Left and

Right Upright Bushings (21, 52).

o adjust the width of the

rays (18), loosen the

Base Knob (31) and slide the Left and Right Posts

(6, 7) closer together or farther apart. When the

Posts are at the desired width, tighten the Base

Knob.

Notches

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Weider WEBE2496 Bedienungsanleitung Seite 10