Weider PRO OLYMPIC EXPANSION KIT 15078 Bedienungsanleitung PDF herunterladen

Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until

assembly is completed. Assembly requires two adjustable wrenches .

Model No. 831.150780

QUESTIONS? If you have questions, or if there are missing or damaged parts, please call our toll-free

HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays).

Assembly Instructions

Olympic Expansion Kit

If you own the 831.150740 (WEIDER PRO 800), follow

steps 1 through 6 below and on page 2 to install the

olympic expansion kit. If you own the 831.150760

(WEIDER PRO 900), follow steps 1 through 6 on page

3 and the back cover.

1. Detach the Crossbar (A) from one of the Upright

Bases (B) by removing the four M10 x 81mm Bolts

(C), the Support Plates (D), and the four M10 Nylon

Locknuts (E). Lay the Upright Base on its side to

keep it from falling.

2. Detach the Frame (F) from the Crossbar (A) by

removing the two M10 x 81mm Bolts (C), the Small

Support Plate (G), and the two M10 Nylon Locknuts

(H).

Note: It may be helpful to have a second person

hold the remaining Upright Base (B) to keep it

from falling.

1. Read all instructions in this manual before

using the olympic expansion kit.

2. The weight bench does not include weights.

The weight bench is designed to support a

maximum of 510 pounds, including the user, a

weight bar, and weights. Do not place more that

310 pounds, including a weight bar and weights,

on the weight rests. Do not place more that 150

pounds on the leg lever or the lat tower.

To reduce the risk of serious injury, read the following important precautions

before using the weight bench.

WARNING:

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Olympic Expansion Kit

Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials untilassembly is completed. Assembly requi

Seite 2

24. Attach the Frame (F) to the Olympic Crossbar (I) withtwo M10 x 81mm Bolts (C), a Small Support Plate(G), and two M10 Nylon Locknuts (H).5. Attach

Seite 3

4. Attach the welded bracket on the Frame (F) to theOlympic Crossbar (I) with two M10 x 81mm Bolts (G)and two M10 Nylon Locknuts (H).1. If you own the

Seite 4 - Limited Warranty

Limited WarrantyFor 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in thisSEARS WEIGHT BENCH ACCESSORY,