Weider WESY19510 Bedienungsanleitung PDF herunterladen (Seite 11)

19. Locate the Short Cable (58). Lay the Short

Cable in the bracket on the Base (4). Attach the

3 1/2” Pulley (15) to the bracket with a 3/8” x 2”

Bolt (12) and a 3/8” Nylon Locknut (21). Be sure

that the end of the Cable with the ball is on

the indicated side of the bracket.

20. Route the Short Cable (58) around the 3 1/2”

Pulley (15) attached to the lower hole in the Front

Upright (42). See the inset drawing. Be sure

that the Cable Trap (66) is turned to hold the

Cable in place and that the Cable is routed

around the Pulley as shown. Tighten the 3/8”

Nylon Locknut (21) and the 3/8” x 3 3/4” Bolt (71).

21. Route the Short Cable (58) around the 3 1/2”

Pulley (15) attached to the Press Frame (17). Be

sure that the Cable Trap (66) is turned to hold

the Cable in place and that the Cable is routed

around the Pulley as shown. Tighten the 3/8”

Nylon Locknut (21) and the 3/8” x 3 1/2” Bolt (not

shown).

Bracket

Ball

Inset shows view

from other side

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Keine Kommentare

Weider WESY19510 Bedienungsanleitung Seite 11